Category Archives: Paving Services

Hire A Contractor To Pave Your Driveway

A paved driveway has some benefits over one built from dirt. This not only feels great but it’s simpler to manage as well. This also reduces the chance of scraping the car on a brick. Paving a driveway is a large work, and not easy. Hence you need to make sure you know how to find the best contractor for the job. To do this you need to know exactly what is involved in paving a driveway so that you know what to look for in a bid from a contractor.Checkout Tampa Pavers Group for more info.

The most critical thing to look for when you are getting a lined driveway is the planning job. You will insure the driveway is poured on a well built foundation. It is something you ought to make sure you are debating with your consultant. The cheapest bids you’ll get in most cases will be from companies that don’t do this part of the job properly. If you choose to use a cheap contractor, you will find your driveway will last no more than a few years.

A suitable foundation for a driveway allows the ground to be excavated to a level of at least one foot; that can cost you quite a bit of money and it’s not straightforward to excavate so deep. You’ll then need to put in six to eight inches of aggregate as a subsoil. It can help the whole road, meaning that it has to be completed properly. The sub-base must therefore be deeply compacted to enable adequate water drainage. Make sure that any bid you receive from a contractor includes this work, and that the bid specifies the depth and the aggregate amount.

The base layer is the next part of the driveway; that should be at least two inches thick. It is necessary to note that the offer states that the foundation is at a compacted thickness of two inches when you submit an offer for your driveway. If not, you may find that they pour asphalt for two inches and then compact it down to a much smaller amount. It takes two inches to insure your driveway will bear your car’s weight.

The final step in paving a driveway is the top layer that should be at least one and a half inches thick, after the base layer is done. The important thing here is to ensure that the correct mix of asphalt is used. Two types of asphalt are commonly used, one class is used for foundation and the second type is used for roof. Within the two classes there are many different mixtures and the right one will depend mainly on the climate you live in. With that you would have to be highly assured that the contractor understands what he is doing and can use the correct asphalt. That is why you need to make sure you ‘re working with someone who’s got a lot of experience.

On the last thing you should make sure the bid you receive includes is the driveway slope to allow drainage. You don’t want to spill water in the center of your driveway so it will drop down into the sides from the core. A slope of one quarter inch is normally ideal for each foot of distance. A contractor will know the right slope, but you want to make sure it’s included in the bid to avoid confusion.

It shouldn’t be all that hard to locate a builder to pave your road, there are a ton of them online. The easiest way to continue is to have people you meet ask for referrals. If you know anyone who has paved their driveway they may suggest someone else. Another choice is if you know some general contractor constructing houses they might be a great source because they’re still dealing with paving contractors. The aim here is to create a list of at least five contractors that can be further researched.